Learn Arduino with Olympia Circuits
Learn Arduino
  • Home
    • Get Started
    • How to Use This Site
  • Electronics
    • The Basics
    • Electricity Flows like Water
    • Electronic Components
    • The Arno Board
  • Programming
    • The Basics
    • setup and loop Blocks
    • Variables and Arrays
    • Connecting with the Pins
    • Flow Control >
      • if Statement
      • Loops
      • Delays
    • Functions
    • Serial Communication
    • USB
    • Some Thoughts
  • Projects
    • Projects 1 >
      • 1.01: Blink
      • 1.02 Blink x2
      • 1.03 Blink Faster
      • 1.04 LED Chase!
      • 1.05 Wait To Blink
      • 1.06 Blink a Little Faster Now
      • 1.07 LED Fade
      • 1.08 RGB Blink
      • 1.09 Change RGB Color with SW1
      • 1.10 Fade RGB Colors
      • 1.11 Reaction Time Game
    • Projects 2 >
      • 2.01 Hello World
      • 2.02 Talk Back
      • 2.03 ASCII Values
      • 2.04 Ski Game
      • 2.05 Demonstration of the String Object
    • Projects 3 >
      • 3.01 Read the Potentiometer
      • 3.02 ASCIIbet Soup
      • 3.03 Potentiometer sets LED Brightness
      • 3.04 Potentiometer Sets Blink Rate
      • 3.05 LED Chase, Part II
    • Projects 4 >
      • 4.01 Bringing the Piezo to Life
      • 4.02 Controlling the Piezo with a Function
      • 4.03 Piezo C Major
      • 4.04 Piezo Greensleaves
      • 4.05 Piezo Metronome
      • 4.06 Piezo as an Input
      • 4.07 Piezo as an Input 2
      • 4.08 Metronome II
      • 4.09 Piezo Playback
      • 4.10 Piezo Fireworks
      • 4.11 Piezo Mosquito
    • Projects 5 >
      • 5.01 The Phototransistor
      • 5.02 Light and Sound
      • 5.03 Light and Sound II
    • Projects 6 >
      • 6.01 EEPROM
      • 6.02 I2C Address Scan
      • 6.03 Read the I2C Temperature Sensor
      • 6.04 High Temperature Alarm
    • Projects 7 >
      • 7.01 Arno Phone Home
      • 7.02 Keyboard Alphabet
      • 7.03 Move Mouse
      • 7.04 Draw Squares
    • Special Projects >
      • Bike Light Demo
  • References
    • Arno Pin Key
    • Arno Schematic
    • Project Index

Programming: flow control

At this point, you probably understand that the Arno (and other computers) run through lines of code one at a time.  This won't take you very far unless you can control the flow of the program.   For example, you may want to execute certain lines of code under one condition and other lines under a different condition.  Since the Arno is designed to interact with the real world, you often need to control the timing of events by getting the Arno to stop and wait.  We cover these topics in this section.  Specifically:
  1. if statements
  2. loops
  3. delays

Copyright Olympia Circuits LLC 2014. All Rights Reserved.