Learn Arduino with Olympia Circuits
Learn Arduino
  • Home
    • Get Started
    • How to Use This Site
  • Electronics
    • The Basics
    • Electricity Flows like Water
    • Electronic Components
    • The Arno Board
  • Programming
    • The Basics
    • setup and loop Blocks
    • Variables and Arrays
    • Connecting with the Pins
    • Flow Control >
      • if Statement
      • Loops
      • Delays
    • Functions
    • Serial Communication
    • USB
    • Some Thoughts
  • Projects
    • Projects 1 >
      • 1.01: Blink
      • 1.02 Blink x2
      • 1.03 Blink Faster
      • 1.04 LED Chase!
      • 1.05 Wait To Blink
      • 1.06 Blink a Little Faster Now
      • 1.07 LED Fade
      • 1.08 RGB Blink
      • 1.09 Change RGB Color with SW1
      • 1.10 Fade RGB Colors
      • 1.11 Reaction Time Game
    • Projects 2 >
      • 2.01 Hello World
      • 2.02 Talk Back
      • 2.03 ASCII Values
      • 2.04 Ski Game
      • 2.05 Demonstration of the String Object
    • Projects 3 >
      • 3.01 Read the Potentiometer
      • 3.02 ASCIIbet Soup
      • 3.03 Potentiometer sets LED Brightness
      • 3.04 Potentiometer Sets Blink Rate
      • 3.05 LED Chase, Part II
    • Projects 4 >
      • 4.01 Bringing the Piezo to Life
      • 4.02 Controlling the Piezo with a Function
      • 4.03 Piezo C Major
      • 4.04 Piezo Greensleaves
      • 4.05 Piezo Metronome
      • 4.06 Piezo as an Input
      • 4.07 Piezo as an Input 2
      • 4.08 Metronome II
      • 4.09 Piezo Playback
      • 4.10 Piezo Fireworks
      • 4.11 Piezo Mosquito
    • Projects 5 >
      • 5.01 The Phototransistor
      • 5.02 Light and Sound
      • 5.03 Light and Sound II
    • Projects 6 >
      • 6.01 EEPROM
      • 6.02 I2C Address Scan
      • 6.03 Read the I2C Temperature Sensor
      • 6.04 High Temperature Alarm
    • Projects 7 >
      • 7.01 Arno Phone Home
      • 7.02 Keyboard Alphabet
      • 7.03 Move Mouse
      • 7.04 Draw Squares
    • Special Projects >
      • Bike Light Demo
  • References
    • Arno Pin Key
    • Arno Schematic
    • Project Index

projects 3: the potentiometer

These projects are an introduction to analog signals.  Unlike the momentary switches that produce a digital signal of either ON or OFF, the potentiometer produces a voltage signal that can range between zero and 5 volts.  We use the analog-digital converter that's built into the microcontroller to measure the voltage signal and convert it into a usable, digital number.  We then use these numbers to create interesting effects using other circuits on the Arno.
Project 3.01 Read the Potentiometer
Project 3.02 ASCIIbet Soup
Project 3.03 Potentiometer sets LED Brightness
Project 3.04 Potentiometer sets blink rate
Project 3.05 LED Chase, Part II

Copyright Olympia Circuits LLC 2014. All Rights Reserved.