Learn Arduino with Olympia Circuits
Learn Arduino
  • Home
    • Get Started
    • How to Use This Site
  • Electronics
    • The Basics
    • Electricity Flows like Water
    • Electronic Components
    • The Arno Board
  • Programming
    • The Basics
    • setup and loop Blocks
    • Variables and Arrays
    • Connecting with the Pins
    • Flow Control >
      • if Statement
      • Loops
      • Delays
    • Functions
    • Serial Communication
    • USB
    • Some Thoughts
  • Projects
    • Projects 1 >
      • 1.01: Blink
      • 1.02 Blink x2
      • 1.03 Blink Faster
      • 1.04 LED Chase!
      • 1.05 Wait To Blink
      • 1.06 Blink a Little Faster Now
      • 1.07 LED Fade
      • 1.08 RGB Blink
      • 1.09 Change RGB Color with SW1
      • 1.10 Fade RGB Colors
      • 1.11 Reaction Time Game
    • Projects 2 >
      • 2.01 Hello World
      • 2.02 Talk Back
      • 2.03 ASCII Values
      • 2.04 Ski Game
      • 2.05 Demonstration of the String Object
    • Projects 3 >
      • 3.01 Read the Potentiometer
      • 3.02 ASCIIbet Soup
      • 3.03 Potentiometer sets LED Brightness
      • 3.04 Potentiometer Sets Blink Rate
      • 3.05 LED Chase, Part II
    • Projects 4 >
      • 4.01 Bringing the Piezo to Life
      • 4.02 Controlling the Piezo with a Function
      • 4.03 Piezo C Major
      • 4.04 Piezo Greensleaves
      • 4.05 Piezo Metronome
      • 4.06 Piezo as an Input
      • 4.07 Piezo as an Input 2
      • 4.08 Metronome II
      • 4.09 Piezo Playback
      • 4.10 Piezo Fireworks
      • 4.11 Piezo Mosquito
    • Projects 5 >
      • 5.01 The Phototransistor
      • 5.02 Light and Sound
      • 5.03 Light and Sound II
    • Projects 6 >
      • 6.01 EEPROM
      • 6.02 I2C Address Scan
      • 6.03 Read the I2C Temperature Sensor
      • 6.04 High Temperature Alarm
    • Projects 7 >
      • 7.01 Arno Phone Home
      • 7.02 Keyboard Alphabet
      • 7.03 Move Mouse
      • 7.04 Draw Squares
    • Special Projects >
      • Bike Light Demo
  • References
    • Arno Pin Key
    • Arno Schematic
    • Project Index

projects 5: the phototransistor

The phototransistor creates a voltage signal that's proportional to the amount of light it receives.  Like the potentiometer in Projects 3, we use the microcontroller's analog-digital converter to measure the signal from the phototransistor and then use it to change the behavior of the Arno's other circuits.
Project 5.01 First Look at the Phototransistor
Project 5.02 Light and Sound
Project 5.03 Light and Sound II

Copyright Olympia Circuits LLC 2014. All Rights Reserved.